Electrochromic display - Page 2

This is a sponsored post by Ynvisible

Fig.1 Example use case for printed electrochromics: a shock detector smart label with an interactive printed interface.

Expanding Need for Simple Electronic Display Functionality

Rapid advances in the miniaturization and reduction of costs in computing, electronic sensing, and communications have allowed the integration of “smart” electronic functionality into almost everything. ”Intelligence” is now embedded into a wide range of everyday objects, and spread throughout our working and living environments. Much of this intelligence, data collection and transfer is hidden from the human senses, requiring little or no human involvement. But as the number of human daily touch points and interactions with smart devices grows, so too does the importance of user experience design and the role of displays.

Conventional electronic displays cannot be economically and sustainably applied into all smart objects and environments and can often times be functionality overkill for the simple display requirements of many everyday objects. Also, user experiences built around the need for extensive use of separate reading devices, e.g. RFID or Bluetooth readers in smart phones, can be increasingly challenging especially with the high number of distractions and strong competition for attention on mobile screens. Further with a doubling of screen time over the past four years among certain user demographics, there is also a growing sense of screen fatigue leading to people “detoxing” from light emitting screens while still valuing user interfaces that are useful yet unobtrusive.

Ynvisible announced a new partnership with Electrochromic Polymers developer NxtGen Nano. The two companies will work together to incorporate NXN's color Electrochromic Polymers (ECP) inks in Ynvisible's systems and manufacturing services. This will enable Ynvisible to offer a new range of color displays.

The two companies announced that they already sold a prototype multi-color project to a Fortune 500 medical and diagnostics devices company. NXN and Ynvisible have earlier experience in working together and sold several commercial color electrochromic prototype devices to several premium consumer brand product companies.

Ynvisible sent us this nice Christmas card, that shows off the company's flexible transparent electrochromic displays. Ynvisible's displays are produced using a simple printing method, which allows them to be quite cost effective.

Ynvisible was established in Portugal in 2010, and in 2011 the company started producing sample products (we tested one in August 2012). In September 2018, the company has gone through a reverse take-over, and the Canadian headquartered Ynvisible Interactive Inc. has inaugurated its new production line near Lisbon.

Ynvisible was established in Portugal in 2010 to develop flexible transparent electrochromic displays produced using a simple printing method. In 2011 the company started producing sample products (we tested one in August 2012). In September 2018, the company has gone through a reverse take-over, and the now Canadian headquartered Ynvisible Interactive Inc. has inaugurated its new production line near Lisbon.

Ynvisible now announced that it is set to acquire Sweden-based Consensum Production AB, a contract manufacturer of printed electronics and hybrid systems. The Consensum team has accumulated over a decade of experience in roll-to-roll printing of different electronic components, including displays. The company operates a full-scale roll-to-roll production line and processes required for manufacture, converting and testing of printed electronics components and systems.

ynvisible was established in Portugal in 2010 to develop flexible transparent electrochromic displays produced using a simple printing method. In 2011 the company started producing sample products (we tested one in August 2012). Fast forward to September 2018, the company has gone through a reverse take-over, and the now Canadian headquartered Ynvisible Interactive Inc. has inaugurated its new production line near Lisbon, and we had an interesting discussion with the company's CEO, Jani-Mikael Kuusisto who updates us on the company's technology and business.

ynvisible is focusing on developing the inks that are used to print these relatively simple displays for use in everyday consumer goods and printable surfaces. The electrochromic displays are cost-effective and highly energy-efficient. The company used to have a capacity to produce a few thousands of displays each month, but the new production facility can produce hundreds of thousands of displays each month.

Sweden-based rdot demonstrated its flexible printed electrochromic display prototypes at SID Displayweek 2018. These are simple displays that are produced using screen printing technology. rdot says that its displays will be ultra-low cost when commercialized.

rdot's displays are monochrome segmented (passive-matrix ones are under development) e-paper displays that are non-volatile (but only up to around 15 minutes, these are not long-term). The displays can be be produced in any color.

Visionect recently appointed Sri Pervuemba to its board of directory. Sri is a long time display veteran and was E Ink's chief marketing manager for over 10 years. Sri is also a good friend and has been supporting E-Ink-Info from its launch. Sri was kind enough to answer a few questions we had regarding the e-paper market and Visionect's technology and platform.

But first, an official bio: Sri Peruvemba is the CEO of Marketer International. His 25 years of experience in the electronics industry include marketing LCD, CRT, TFEL, OLED, LED, Plasma and ePaper displays into the consumer, mobile, industrial, medical, signage and TV markets. He earned a BSEE, a MBA and a Post Graduate Diploma in Management. He was previously CMO for E Ink and also held senior level positions at Sharp Corp, TFS Inc., Planar Systems and Suntronic Technology. Peruvemba currently serves as Director on the Board of Visionect Inc., as well as on the board of the Society for Information Display(SID).

Portugal-based Ynvisible is developing flexible transparent electrochromic displays and the company is already producing some displays in low volume. The company now launched a kickstarter project called Printoo that aims to develop an Arduino-based platform of paper-thin, low-power boards and modules. The company already reached their financing goal of $20,000 and there's still 25 days to go.

The Printoo platform includes 17 modules, including a microprocessor, a printed battery, Ynvisible's flexible, transparent display and a flexible solar cell. This is pretty cool stuff and it'll be great to see how the company delivers on their promise.

Lux Research posted an interesting grid that shows how different display developers rate on technical value and business execution. It includes mature technologies like OLED and electrophoretic and emerging technologies such as electrochromic and electrofluidic displays.

E Ink comes up on top in both technical value and business execution is E Ink - with high score in technology and IP and strong partnerships and management team. In face, E Ink is the only company that scores a "strong positive" - with their nearly 100% market share of the electrophoretic market - which is used in products such as Amazon's Kindle and B&N Nook e-readers.

Portugal's Ynvisible won a grant from the Portuguese National Strategic Reference Framework (QREN) to help develop electrochromic displays. The total project is valued at over €1 million. Ynvisible's electrochromic ink technology is aimed towards packaging, advertising, print media, signage and smart wearables. Initial products will include point-of-sale posters and advertising.